Sto compilando una trascrizione per una usucapione, evento raro. L'ultima volta fu circa otto anni fa con software Unimod su PC andato in pensione.

Ora trovo Unimod sul Desktop del Territorio, ma non so come installare Black Box perchè vorrei vedere la Nota di Trascrizione leggibile su carta.

Come posso fare ?

Grazie

This is where 90% of "3040 not connecting" errors occur.

: The machine typically features a rigid aluminum frame and ball screws, delivering a repeatable accuracy of approximately Material Versatility

: Most models include a 300W to 500W air-cooled spindle, though 800W+ water-cooled versions are available for quieter, sustained operation. Setup & Software Considerations

: Ensure the gantry is perfectly parallel to the front and back of the frame to prevent angled cuts.

: Heavy-duty cast iron or steel structure with a cutting area roughly 10.8 x 15 inches .

Your is connected, but if the machine moves 10mm when you command 100mm, your steps-per-mm are wrong.

3040 Cnc Usb Setup

This is where 90% of "3040 not connecting" errors occur.

: The machine typically features a rigid aluminum frame and ball screws, delivering a repeatable accuracy of approximately Material Versatility

: Most models include a 300W to 500W air-cooled spindle, though 800W+ water-cooled versions are available for quieter, sustained operation. Setup & Software Considerations

: Ensure the gantry is perfectly parallel to the front and back of the frame to prevent angled cuts.

: Heavy-duty cast iron or steel structure with a cutting area roughly 10.8 x 15 inches .

Your is connected, but if the machine moves 10mm when you command 100mm, your steps-per-mm are wrong.