Patch Aspire 105 Better _hot_

| Problem | Cause | The "Better" Fix | | :--- | :--- | :--- | | | Bobbin tension too loose for dense fill | Increase bobbin tension 1/4 turn clockwise | | Corner gaps in circles | Pull compensation off | Add 0.5mm extra to 45-degree angles | | Needle breaks on border | Satin density too high | Reduce border density to 6.5 (from 7.5) | | Patch lifts off cap | Lack of fusible backing | Iron Heat-n-Bond to the back of the cap fabric before hooping |

: After the patching process is complete, restart the program. A notification should appear confirming that the update was successful. Key Improvements in Aspire 10.5 patch aspire 105 better