Autocraft Battery Charger Ac-60cr Manual

Note from the AC-60CR manual: Always select the correct battery type before charging. Using Gel mode on a flooded battery may undercharge it; using Standard mode on a Gel battery can destroy it.

The battery is fully charged in terms of voltage, but the cold cranking amps (CCA) are depleted. Solution: Run the "Engine Start" mode (60 amps) for 3–5 seconds while attempting to crank the engine. Warning: The manual states you must not use this mode for more than 5 seconds without a 3-minute cool-down period. autocraft battery charger ac-60cr manual

This write-up covers the Autocraft AC-60CR (12V 60A/2A) Automatic Battery Charger and Maintainer Note from the AC-60CR manual: Always select the

The AC-60CR includes self-diagnostic alerts. Here is the official troubleshooting table: Solution: Run the "Engine Start" mode (60 amps)

Use the Mode/Menu button to select the appropriate battery type or size (e.g., Motorcycle/Car/AGM).

: Ideal for maintaining small batteries (like motorcycle batteries) or slowly topping off a car battery. Power On : Plug the charger into a standard 120V AC outlet. Monitoring and Charging Times