| Error Message | Likely Cause | Resolution | |---------------|--------------|-------------| | TP_ERR_SCAN_COIL_SAT | Scan amplitude exceeds ±10V | Reduce FOV or re-calibrate coil driver gain. | | TP_ERR_ADC_OVERRUN | PC cannot keep up | Increase buffer_size , reduce Ethernet load, or use a dedicated NIC. | | TP_ERR_STAGE_TIMEOUT | Stage not responding | Check RS232/USB connection; set slower stage speed: dev.set_stage_speed(0.5) (mm/s) | | TP_ERR_NO_BEAM_BLANK | Blanker not installed/configured | Disable blanking: dev.set_blanker_enabled(False) . |
// Clean up Tornado_CloseDevice(hDevice); return 0;
If the light on the microscope turns on but the screen is black, it’s usually a Privacy Setting