Dsotc2 Firmware Link (DIRECT)

For the FNIRSI DSO-TC2 Go to product viewer dialog for this item.

Even with the correct , updates can fail. Here’s how to recover: dsotc2 firmware link

uses a simulated USB drive method for updates. The process differs slightly depending on which part of the device you are upgrading: DSO Oscilloscope Part (CH Upgrade): Connect the device to your PC while it is turned off using a Type-C data cable. Wait roughly 2 seconds after booting for a drive named to appear on your computer. Drag and drop the firmware file (typically starting with ) into this drive. Transistor Detector Part (MM Upgrade): Connect the device to your PC while turned off Down Arrow key and power the device on. A drive named should appear. Copy the firmware file (starting with For the FNIRSI DSO-TC2 Go to product viewer

Copy the firmware file (often starting with "CH") directly into the "CH BOOT" drive. Complete the Process The process differs slightly depending on which part