Xh-m608 Manual

Congratulations on completing this comprehensive Xh-m608 manual! You're now well-equipped to navigate the world of Xh-m608 and unlock its full potential. Remember to explore the device's features, customize your experience, and troubleshoot common issues. If you have any further questions or concerns, refer to the official user manual or contact the manufacturer's support team.

| Code | Meaning | Typical Range | |------|------------------------|------------------------| | P0 | Set temperature (SP) | -50 to +120°C | | P1 | Hysteresis (differential) | 0.1–15°C | | P2 | Control mode (heating/cooling) | H (heat) / C (cool) | | P3 | Calibration offset | -10 to +10°C | | P4 | Delay start (compressor protection) | 0–10 min | | P5 | High temperature alarm limit | up to 120°C | | P6 | Low temperature alarm limit | down to -50°C | Xh-m608 Manual

Supports DC 6–40V input, suitable for 12V, 24V, and 36V battery systems. Precision: Features a voltage error and control accuracy of plus or minus 0.1 cap V Safety Features: If you have any further questions or concerns,

Common programmable parameters (may vary slightly by firmware version): suitable for 12V